Firmware Dumping

Flash Memory Types

NOR Flash (SOIC8 package)
- SPI Flash
- Mostly error "Fault-free" memory
- Used for embedded device that need fast execution, but low storage capacity
NAND Flash (TSOP48 package)
eMMC Flash (BGA{153} package)
UFS Universal Flash Storage

Flash a new firmware into the microcontroller

# send raw data firmware
$ avrdude -p m328p -c usbasp -P /dev/ttyUSB0 -b 9600 -U flash:w:flash_raw.bin

# send ihex firmware
$ avrdude -c arduino -p atmega328p -P /dev/ttyUSB* -b115200 -u -V -U flash:w:CHALLENGE.hex
$ avrdude -c usbasp -p m328p -F -U flash:r:dump.hex:i

# default
$ avrdude -c usbasp -p m328p -C /etc/avrdude.conf -U flash:w:hardcodedPassword.ino.arduino_standard.hex

Using raspberrypi/picotool

# extension indicates the type (bin, uf2)
picotool load firmware.bin

Dump flash using debug port

Using avrdudes/avrdude

avrdude -p m328p -c usbasp -P /dev/ttyUSB0 -b 9600 -U flash:r:flash_raw.bin:r
avrdude -p m328p -c arduino -P /dev/ttyACM0 -b 115200 -U flash:r:flash_raw.bin:r
avrdude -p atmega328p -c arduino -P/dev/ttyACM0 -b 115200 -D -U flash:r:program.bin:r -F -v

Using openocd-org/openocd

Determine code space in the microcontroller (for example nRF51822 - Micro:bit), save as dump_img.cfg:
```
init
reset init
halt
dump_image image.bin 0x00000000 0x00040000
exit
```

Dump with openocd

sudo openocd -f /home/maki/tools/hardware/openocd/tcl/interface/stlink-v2-1.cfg -f /home/maki/tools/hardware/openocd/tcl/target/nrf51.cfg -f dump_fw.cfg

Using raspberrypi/picotool

Build PicoTool, you will need the pico-sdk

# PicoSDK
git clone https://github.com/raspberrypi/pico-sdk.git
cd pico-sdk
git submodule update --init

# Picotool
cd ..
git clone https://github.com/raspberrypi/picotool.git
cd picotool
mkdir build
cd build
cmake -DPICO_SDK_PATH=../pico-sdk ..
make

Dump the program or the whole flash memory

sudo ./picotool save -F /tmp/out.bin
Saving file: [==============================]  100%
Wrote 73312 bytes to /tmp/out.bin

sudo ./picotool save --all -F /tmp/out2.bin
Saving file: [==============================]  100%
Wrote 2097152 bytes to /tmp/out2.bin

Dump Flash via SPI

Using flashrom/flashroom

sudo apt-get install build-essential pciutils usbutils libpci-dev libusb-dev libftdi1 libftdi-dev zlib1g-dev subversion libusb-1.0-0-dev
svn co svn://flashrom.org/flashrom/trunk flashrom
cd flashrom
make

flashrom -p ft232_spi:type:232h -r spidump.bin
flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=512 -r spi_dump.bin
flashrom -p serprog:dev=/dev/ttyACM0,spispeed=160k -r dump_spi.bin -c "MX25L6406E/MX25L6408E"

Using HydraBus: hydrabus/hydrafw/hydra_spi_dump.py

./hydra_spi_dump.py firmware.bin 1024 0x000000 fast

Convert ihex to elf

The Intel HEX is a transitional file format for microcontrollers, (E)PROMs, and other devices. The documentation states that HEXs can be converted to binary files and programmed into a configuration device.

Each line in the ihex file starts with :

a colon :
followed by ONE BYTE = record length
followed by TWO BYTES = offset to load
followed by ONE BYTE = Record Type
Last BYTE in the line = Checksum

Convert .hex(ihex format) to .elf file with avr-objcopy or with an online tool http://matrixstorm.com

$ avr-objcopy -I ihex -O elf32-avr dump.hex dump.elf
# or 
$ objcopy -I ihex chest.hex -O binary chest.bin ; xxd chest.bin

Alternative with Python bincopy

import bincopy
import sys

f = bincopy.BinFile()
f.add_ihex_file(sys.argv[1])
print(f.as_binary())

Quick strings on .hex

cat defaultPassword.ino.arduino_standard.hex | tr -d ":" | tr -d "\n" | xxd -r -p  | strings

Inspect the assembly with avr-objdump -m avr -D chest.hex.\
Emulate : qemu-system-avr -S -s -nographic -serial tcp::5678,server=on,wait=off -machine uno -bios chest.bin

Explore Filesystem

Common Filesystem

SquashFS : It is a compressed read-only filesystem commonly used in Linux-based Firmware. It provides a good flexibility because it supports creating writable overlay filesystems, allowing changes to be made to the filesystem at runtime.
CramFS (Compressed ROM Filesystem) : Simple read-only filesystem, that supports compression.
ROMFS (Read-Only Memory Filedystem) : Simple filesystem that is strictly read-only, and do not provide compression support.
YAFFS/YAFFS2 (Yet Another Flash Filesystem) : This filesystem is specifically designed for NAND Flash memory. In particular, it incorporates ECC management for ensuring data integrity. Filesystem integrity is also maintained by storing metadata redundantly.
JFFS/JFFS2 (Journalized Flash Filesystem) : This filesystem is also designed for NAND Flash memory. JFFS utilizes a journaling mechanism to track changes to the filesystem, ensuring data consistency and integrity even in the event of sudden power loss or system crashes. It also supports ECC.
UBIFS (Unsorted Block Image Filesystem) : UBIFS is a successor to JFFS2 and is optimized for NAND flash memory. It offers improved performance, reliability, and scalability, with features such as compression, encryption, and fast mounting. UBIFS supports multiple partitions.

Filesystem	RO/RW	Magic	Tool
SquashFS	RO	sqsh, hsqs, qshs, sqsl	unsquashfs, 7zip
JFFS(2)	RW	0x07C0 (v1), 0x72b6(v2)	jefferson
YAFFS(2)	RW	0x5941ff53	unyaffs
CramFS	RO	0x28cd3d45	uncramfs, 7zip
UBIFS	RW	0x06101831	ubi_reader
RomFS	RO	0x7275	/
CPIO	RO	"070707"	cpio, 7zip

Tools

unix/strings

$ strings file.bin

$ strings -e l file.bin
The strings -e flag specifies the encoding of the characters. -el specifies little-endian characters 16-bits wide (e.g. UTF-16)

$ strings -tx file.bin
The -t flag will return the offset of the string within the file. -tx will return it in hex format, T-to in octal and -td in decimal.

unix/dd

$ dd if=firmware.bin of=firmware.chunk bs=1 skip=$((0x200)) count=$((0x400-0x200))
If we wanted to run it a little faster, we could increase the block size:
$ dd if=firmware.bin of=firmware.chunk bs=$((0x100)) skip=$((0x200/0x100)) count=$(((0x400-0x200)/0x100))

ReFirmLabs/binwalk

$ binwalk -Me file.bin
$ binwalk -Y dump.elf 
DECIMAL       HEXADECIMAL     DESCRIPTION
--------------------------------------------------------------------------------
3708          0xE7C           ARM executable code, 16-bit (Thumb), little endian, at least 522 valid instructions

onekey-sec/unblob

docker run --rm --pull always -v /path/to/extract-dir/on/host:/data/output -v /path/to/files/on/host:/data/input ghcr.io/onekey-sec/unblob:latest /data/input/path/to/file
docker run --rm --pull always ghcr.io/onekey-sec/unblob:latest --help

squashfs-tools/unsquashfs

sudo unsquashfs -f -d /media/seagate /tmp/file.squashfs

onekey-sec/jefferson - JFFS2 filesystem extraction tool

pip install jefferson
jefferson filesystem.img -d outdir
jefferson file.jffs2 -d jffs2

whataday/unyaffs - YAFFS2 filesystem extraction tool

unyaffs [-l <layout>] [-t] [-v] [-V] <image_file_name> [<base dir>]
    -l <layout>      set flash memory layout
        layout=0: detect chunk and spare size (default)
        layout=1:  2K chunk,  64 byte spare size
        layout=2:  4K chunk, 128 byte spare size
        layout=3:  8K chunk, 256 byte spare size
        layout=4: 16K chunk, 512 byte spare size
    -t               list image contents
    -v               verbose output
    -V               print version

Write new firmware

Repack firmware

mksquashfs4 squashfs-root myrootfs {options}
dd if=myrootfs of=dump/bin bs=1 seek=<offset> conv=notrunc

Flashrom write

flashrom -p ft2232_spi:type=232H -w dump.bin

Type of firmware

SREC - Motorola S-Record : All S-record file lines start with a capital S.
Intel HEX lines all start with a colon.
TI-TXT is a Texas Instruments format, usually for the MSP430 series. Memory addresses are prepended with an @, and data is represented in hex.
Raw NAND dumps

Check entropy

High entropy = probably encrypted (or compressed). Low entropy = probably not

binwalk -E fw